Midwesco Filter is an authorized distributor of the SPI coating products line for industrial insulation, fire and corrosion control. Our product distribution includes Super Therm®, HPC™ Coating, Rust Grip®, and Lining Kote.
is a unique one part moisture cure polyurethane enamel product that holds a worldwide patent (#5,695,812)
on the encapsulation of corrosion, rust, lead based paint, asbestos and other bio-hazardous materials. Rust Grip® requires minimal surface preparation and NO WHITE METAL SANDBLASTING. It performs as both primer and top coat in a true, high performance one coat system.
The product utilizes light weight molecular solvent agents to carry the body of the coating deep into the pores of the substrate. Once there, Rust Grip® pulls moisture from the air, expands and gases itself -- locking down on the substrate to effectively become one with the substrate. This results in an unbroken barrier against air and moisture penetration. Upon a full cure term of 30 days, Rust Grip® hardens to an incredible 12,000 psi surface tensile strength. When fully cured, Rust Grip® maintains very low permeability, which eliminates the penetration of moisture, salt, and acid which in turn removes the opportunity for rust to form.
This insulation method is much different than the traditional “wrap” insulation materials that only slow down the loss of heat (known as an R rating or “heat transfer”). The four ceramic compounds used create a barrier to catch and hold heat on the surface of the unit—be it pipe, furnace surface, boiler, etc. Unlike wraps that use air as the insulation component, the ceramic compounds in HPC™ Coating resist absorbing heat trying to come off the surface to escape. This traps and holds the heat onto the surface for more effective insulation performance thus eliminating the creation of corrosion under insulation or CUI.
HPC™ Technical Data Sheet
HPC™ MSDS Sheet
Project Recommendation Sheet
Super Therm®Lining Kote
is a ceramic based, water-borne, insulating coating, designed to block heat load, moisture penetration
, and air infiltration over a surface to reduce energy costs. Super Therm®
is the most effective and longest lasting ceramic insulation coating on the market today. Super Therm®
reflects over 95% of the three radiation sources from the sun (ultraviolet, visual light, and infra red rays).
Major corporations around the world have applied Super Therm®
to the exterior roof and wall of their plants to insulate and weatherize them. The coating has a proven 18 year history of lowering energy use (HVAC) inside a structure of up to 70%. This results in outstanding savings on monthly energy costs.
No other insulation or weatherization material in the world has the facts, test results, and field studies to compare with Super Therm®. There is no other product in the world market with the proof of performance equal to Super Therm®. Super Therm® Literature
Super Therm® Technical Data SheetSuper Therm® MSDS Sheet
protects against the harshest acids, bases, chemicals and solvents with Lining Kote. Lining-Kote's two-part high-molecular epoxy composition provides durable and flexible protection. Lining Kote
is made with a high molecular weight base and cure for strength and durability. Lining Kote
is designed to withstand the toughest acid, chemical or solvent environments. It is ideal for petrochemical plants, chemical storage, ballast tanks and more. Lining Kote
has outstanding adhesion and extended durability that withstands direct impact, resistant to water, humidity, chemical compositions and temperatures up to 350°F (176°C).Lining Kote Literature
Lining Kote Technical Data Sheet
Lining Kote MSDS Sheet
Project Recommendation Sheet
Moist Metal Grip
is designed for application on dry or wet surfaces for protection against corrosion and chemicals in a two-part epoxy coating. It is a water repelling epoxy for use under water or in
areas where constant splashing or condensation is a problem. Moist Metal Grip contains specific additives for application on dry or wet surfaces and for protection against corrosion and chemicals. Moist Metal Grip
was developed to be applied to metal surfaces that cannot be dry enough to use Rust Grip®. Moist Metal Grip is EU certified for potable water usage and approved by European standards. It is tested to withstand temperatures up to 350°F (176°C) and for 450 hours of salt spray exposure.
Moist Metal Technical Data SheetMoist Metal Grip MSDS SheetEnamo Grip
provides a permanent, protective membrane that stops water penetration, preventing surface deterioration, contamination and development of mold and mildew. Enamo Grip is a two-part aliphatic polyurethane enamel available in clear and
colors. It fo
rms a uniquely hard and durable coating film, which demonstrates unsurpassed semi-glass and color retention, as well as chalk resistance when used in exterior applications. It is resistant to water and humidity, stains, acids, solvents and chemicals, as well as having tremendous scuff, mar and impact resistance. Enamo Grip
will self-level to an even and smooth finish.
Enamo Grip Technical Data Sheet
Enamo Grip 5000 Technical Data Sheet
Enamo Grip Base MSDS Sheet
Enamo Grip Curing MSDS Sheet
Enamo Grip 5000 Base (Clear) MSDS Sheet
Enamo Grip 5000 Curing (White) MSDS Sheet
Other industrial coating products are available upon request.
Start saving today by filling out our Project Recommendation Sheet or call us at 800.336.7300 | +1.540.667.8500